Pump Dimension Comparison by OE and Application

Reference Standard: The catalog cites ASTM F1545 in the leakage-check information for the Auxiliary Water Pump. That reference belongs to the documented QC record and should not be treated as a dimensional or interchangeability standard without separate verification.

Pump Dimension Records Must Stay Tied to Part Identity

A pump dimension becomes useful for comparison only when it remains attached to the correct pump type, OE/reference number, and machine application. The supplied records contain several different pump entries with different functions and sizes, so there is no single catalog value that can safely represent “pump dimension” across all of them. :contentReference[oaicite:0]{index=0}

The dimension itself is only one identification field. A maintenance record that says “30 cm × 20 cm × 20 cm pump” is incomplete because two separate catalog entries carry that same listed size: a Konecranes Hydraulic Gear Pump and a KALMAR Auxiliary Water Pump. Equal dimensions do not turn those records into equivalent parts.

The reverse is also important. Different listed dimensions do not automatically prove that two records represent incompatible alternatives. The catalog entries first need to be separated by their OE references, pump type, and documented machine context. Only after that identity work does a size comparison become meaningful.

For maintenance and replacement research, this creates a practical rule: identify first, compare second. Size can help narrow a record, but it should not replace the OE number or application information.

Ningbo Beilun Zhenke Machinery Equipment Co., Ltd. is identified in the supplied material, which also describes the business in the context of OEM-compatible parts for brands including SANY, Konecranes, and Deutz and specialization in reach-stacker parts. Within the provided pump records, the useful comparison is therefore not a generic catalogue of pump sizes but a controlled comparison of specific documented entries.

Comparing Verified Pump Dimensions by OE and Application

The four pump records should remain separate because each represents a specific documented identity.

Pump record OE/reference numbers Documented size Documented weight
Konecranes Hydraulic Gear Pump 6022.057=52780110 / 6022.041 / 7029110058 / 3349111732 30 cm × 20 cm × 20 cm Gross weight 6 kg
KALMAR Auxiliary Water Pump 3830046 / 923976.0196 30 cm × 20 cm × 20 cm Gross weight 8.0 kg
KALMAR DRF 400-450 Fuel Pump 20752310 / 923976.0103 / 21067988 / 21067955 / 3092460 / 21067551 12 cm × 13 cm × 25.5 cm Weight 1.2 kg
Oil Pump 250227 / 60138654 / 923855.0179 Approximate Size 17.5 cm × 17.5 cm × 41 cm Weight 5.5 kg

The first comparison illustrates the main risk clearly. The Hydraulic Gear Pump and Auxiliary Water Pump both have a listed Size of 30 cm × 20 cm × 20 cm, yet their catalog identities and functions are different. Their listed weights are also different: 6 kg gross weight for the Hydraulic Gear Pump and 8.0 kg gross weight for the Auxiliary Water Pump.

That difference does not establish anything about mounting compatibility, construction, port locations, internal capacity, pressure performance, or interchangeability. It simply reinforces that dimension must remain attached to the correct record.

The KALMAR DRF 400-450 Fuel Pump is documented at 12 cm × 13 cm × 25.5 cm with a 1.2 kg weight. Its OE reference set is substantially different from the other entries, so comparing its dimensions with the water or hydraulic pump without preserving identity would mix unrelated records.

The Oil Pump is especially important for documentation discipline because its source wording is Approximate Size 17.5 cm × 17.5 cm × 41 cm, together with a 5.5 kg weight. The word “Approximate” is part of the specification record and should remain there when the information is copied into a maintenance database, quotation request, or replacement comparison.

Catalog Image Supporting Reach-Stacker Replacement Part Identification And Pump Dimension Record Review

Dimensions therefore work best as record-level identifiers, not standalone compatibility statements. A technician or buyer can use them to notice that a record is obviously different from another entry, but a matching dimension is not proof that two pumps share the same interfaces.

Product Size and Package Size Should Not Be Guessed

A subtle problem in pump dimension data is the meaning of the word Size itself.

If a source simply states “Size 30 cm × 20 cm × 20 cm,” that wording should be preserved. It should not silently become “pump body dimensions,” “shipping carton dimensions,” “installation envelope,” or “package dimensions.” Each of those descriptions carries a different technical meaning.

This distinction matters because maintenance databases often outlive the original catalog page or PDF. Once a value has been relabeled, later users may assume that somebody actually measured the physical pump body or verified the shipping carton. That assumption can then influence warehouse planning, replacement selection, or installation preparation even though the original source never defined the measurement that way.

The safest record is therefore the most literal one:

  • Source field: Size
  • Recorded value: 30 cm × 20 cm × 20 cm
  • Meaning of measurement: Not defined by the available record

For the Oil Pump, the source is even more specific in its uncertainty:

  • Source field: Approximate Size
  • Recorded value: 17.5 cm × 17.5 cm × 41 cm
  • Meaning of measurement: Not defined by the available record

Preserving “Approximate Size” prevents a maintenance system from converting a qualified value into an apparently exact physical specification.

This approach is also important when two pump records happen to share the same size. If the dimension field may represent an undefined catalog measurement, equal values cannot establish identical outer geometry. Even if the values did describe outer dimensions, they still would not establish identical shaft position, mounting hole pattern, flange geometry, connection orientation, hose interfaces, or installation clearances.

Signs a Pump Dimension Comparison Is Becoming Unreliable

  • The dimension has been copied without the OE or reference number.
  • A source field labeled Size has been renamed “product dimensions” or “package dimensions” without supporting evidence.
  • Two pumps with equal dimensions are being treated as interchangeable despite having different pump types or application records.

The catalog also provides QC information for the Auxiliary Water Pump, stating that every pump undergoes 72-hour pressure cycling tests, leakage checks referenced to ASTM F1545, and vibration-resistance validation matching engine specifications. Those statements belong to that pump’s QC record. They do not define what the listed 30 cm × 20 cm × 20 cm size measures, and they should not be used to infer dimensional tolerance or installation geometry.

This separation is useful: QC evidence answers a different question from dimensional evidence. Combining the two without source support would create specifications that the original record does not provide.

What to Record Before Comparing Replacement Pump Dimensions

A reliable replacement comparison begins with a structured record rather than a measurement alone.

First, capture the pump type exactly as documented. Hydraulic Gear Pump, Auxiliary Water Pump, Fuel Pump, and Oil Pump should not be collapsed into a generic “pump” field when the source distinguishes them.

Second, retain the complete OE/reference number set. One record may contain several cross-reference numbers, and deleting all but one can make it harder to match a machine record, purchasing history, or existing label later.

Third, retain the documented brand or machine application. The available records include Konecranes and KALMAR-related entries, including the KALMAR DRF 400-450 Fuel Pump. Application context helps prevent a dimension from being detached from the machine family that gave it meaning.

Fourth, copy the dimensional field exactly. If the catalog says Size, keep “Size.” If it says Approximate Size, keep “Approximate Size.” Do not increase the apparent precision of the source during data entry.

Fifth, keep the documented weight with the same record. Weight cannot prove compatibility, but it provides another verified identifier that may help distinguish otherwise similar records.

Finally, create a field that states whether the source defines what the dimension actually measures. If it does not, record that meaning as unresolved rather than guessing.

Pump Dimension Record Checks Before Replacement Review

  1. Confirm the pump type before comparing any dimensions.
  2. Capture every documented OE and reference number associated with the record.
  3. Record the stated machine, model, or brand application.
  4. Copy the source dimension exactly, including the word Approximate when present.
  5. Keep the associated weight as a separate identification field.
  6. Preserve the original label Size instead of automatically renaming it.
  7. Mark the measurement meaning as undefined when the source does not identify product size, package size, or installation envelope.
  8. Do not infer mounting geometry, port position, shaft interface, tolerances, or interchangeability from listed size alone.
  9. Treat identical size values as a reason for further identity checks, not as proof of equivalence.
  10. Request additional verified interface or installation information before making a final replacement-compatibility decision.

This method turns pump dimension into a useful maintenance reference without asking it to prove more than the source supports.

The main objective is not to find the closest-looking set of numbers. It is to maintain a traceable chain from pump identity → OE references → application → original dimension wording → associated weight → unresolved dimensional meaning.

That chain makes future comparisons easier to audit. It also prevents a maintenance record from gradually accumulating assumptions that later appear to be catalog specifications.

Dimension comparison can therefore narrow candidate records and expose obvious differences, but it cannot independently establish replacement compatibility. Verified mounting dimensions, connection geometry, port locations, shaft or flange interfaces, installation clearances, dimensional tolerances, and other fitment data would be needed before those conclusions could be made.

For additional reach-stacker parts context, see the Ningbo Beilun Zhenke Machinery Equipment Co., Ltd. parts resource.

Frequently Asked Questions (FAQ)

What viewpoint helps evaluate pump dimension from a maintenance perspective?

Use an identity-controlled maintenance viewpoint. Keep each dimension with its pump type, OE references, application, original size wording, and documented weight. Compare dimensions only after those records are aligned, and do not treat a matching size as proof of installation compatibility.